Connect the load to the crane or hoist hook without damaging its surface.

Screw pulleys
Key features
- Available versions (wheel material/diameter mm)zamak/40, zamak/50, brass/30, brass/40, brass/50
What it is
Pulleys, hoists and winches are devices for lifting or pulling loads with ropes or chains, reducing the effort by mechanical advantage or by means of a motor.
Pulleys, hoists and winches are devices for lifting or pulling loads with ropes or chains, reducing effort through mechanical advantage or a motor.
What it is for
Used for lifting loads, with accessories rated for the weight involved.
How to use it
Check that the capacity of the device and of the attachment point exceeds the load, and hang it from a solid structure with the hook safety latch closed. Lift slowly, with the load hanging vertically below the attachment point, and never stand underneath. Before use, check the rope or chain, hooks and brake, and carry out the periodic inspections required for lifting equipment.
Where it is used
- Building maintenance
Who it is for
Designed for building maintenance operatives and industrial maintenance technicians.
Related products
- Well pulleys with hook
- Hook pulleys
- Galvanised Rings for Turnbuckles — from the category Chains and Accessories
- Round polyester ropes — from the category Lifting Slings
- Lifting hook CSC Edilizia 252 — from the category Lifting and Towing Hooks
- Browse the whole category: Pulley Blocks and Hoists
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 1
| Available versions (wheel material/diameter mm) | zamak/40, zamak/50, brass/30, brass/40, brass/50 |
|---|
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Connect chains, ropes and straps to the load or to the attachment point.
Make tie rods, bracing, fencing and tensioned lines using wire ropes and fittings.
Attach and move heavy loads with steel chain slings and tie-downs.




