GNSS receiver for machine control iCON gps 100 with CR50 unit Leica

What it is

GNSS receiver for machine control iCON gps 100 with CR50 unit Leica. Key specifications: GNSS channels 555, GNSS constellations GPS, GLONASS, Galileo, BeiDou, RTK accuracy, single base < 30 km Hz 8 mm + 1 ppm / V 15 mm + 1 ppm.

GNSS receivers and antennas receive signals from navigation satellites and calculate the position of a point with precision; the RTK rover obtains it in real time with a correction from a base station or a network.

What it is for

Used for levelling surfaces and structures and for setting out, in earthmoving work and in excavation work.

How to use it

Mount them on a pole or a tripod with a clear sky view, away from reflective surfaces and obstructions. Wait for the fixed position signal before surveying the point. Enter the antenna height in the controller. Protect them from knocks and rain.

Where it is used

• Road and motorway construction
• Civil engineering
• Earthmoving and excavation

Technical data

• GNSS channels: 555
• GNSS constellations: GPS, GLONASS, Galileo, BeiDou
• RTK accuracy, single base < 30 km: Hz 8 mm + 1 ppm / V 15 mm + 1 ppm
• ICON gps 100 consumption (W): 7.7 typical (24 V, 320 mA)
• Operating temperature (°C): da -40 a +65
• CR50 dimensions (mm): 150 x 150 x 40
• CR50 power supply (V DC): 9 - 36
• CR50 communication: integrated LTE cellular modem, optional 403-473 MHz UHF radio
• CR50 protection rating: IP6K8 / IP6K9K (ISO 20653)

Who it is for

Designed for site managers, excavator operators and surveyors.

Standards and compliance

Reference standards: CE marking in accordance with the EU directives applicable to the iCON construction sector, compliance with current technical and safety standards, technical documentation supplied by the manufacturer Leica.

Laser measuring tool iCON gps 100 and CR50 Leica (Leica) — A small but powerful basic-level dual GNSS receiver for compact machines. If the correction link is interrupted, our customers can rely on SmartLink Fill, a GNSS correction service that can bridge the RTK link outage and maintain centimetre-level accuracy for up to 10 minutes. If they wish, customers can upgrade their basic machine control solution with the Leica CR50 communication unit to receive RTK corrections via UHF radio or cellular modem. This offers greater flexibility and the freedom to adapt the machine control solution to different projects and site requirements. The main features of the Leica CR50 are the web interface, automotive Ethernet communication, the global cellular network modem and the integrated dual-frequency UHF radio, which allows customers to switch easily between 400 MHz and 900 MHz (USA and Canada only).

Related products

• GNSS receiver for reference stations GR50 and GR30 Leica
• GNSS receiver for machine control iCON aps 200 Series Leica
• Laser receiver REC 500 RG Stabila — from the category Laser Accessories
• Telescopic Pole CRL290 — from the category Laser Level Accessories
• Button-cell battery Proxe — from the category Household Batteries
• Browse the whole category: Laser Measuring Tools and Accessories

Before you order

Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.