GNSS receiver GM30 for monitoring Leica

What it is

The GM30 GNSS receiver for monitoring Leica is intended for professional use in the following contexts:

GNSS receivers and antennas receive signals from navigation satellites and calculate the position of a point with precision; the RTK rover obtains it in real time with a correction from a base station or a network.

What it is for

Used for topographic surveying and site setting-out.

How to use it

Mount them on a pole or a tripod with a clear sky view, away from reflective surfaces and obstructions. Wait for the fixed position signal before surveying the point. Enter the antenna height in the controller. Protect them from knocks and rain.

Where it is used

• Road and motorway construction
• Civil engineering
• Earthmoving and excavation

Technical data

• Type: GNSS receiver for continuous monitoring
• GNSS channels: 555
• GNSS constellations: GPS, GLONASS, Galileo, BeiDou
• Single base accuracy < 30 km (Hz): 6 mm + 1 ppm to 8 mm + 1 ppm depending on mode
• Phase measurement noise: < 0.5 mm rms
• Antenna connector: TNC female
• Operating temperature (°C): da -40 a +65
• Protection rating (IP): IP68

Who it is for

Designed for site managers and surveyors.

Standards and compliance

Reference standards: CE marking in accordance with the EU directives applicable to the GNSS systems sector, compliance with current technical and safety standards, technical documentation supplied by the manufacturer Leica.

GNSS monitoring receiver GM30 Leica (Leica) — To make quick, informed decisions, monitoring professionals around the world need actionable positioning data on critical natural and man-made structures. The Leica GM30 monitoring receiver meets today's and tomorrow's GNSS signal needs by providing 555 GNSS channels; it is future-proof and reliably delivers top-quality results 24 hours a day, 7 days a week. With support for all available and future GNSS signals, specialists are assured of timely, accurate information on the condition of sensitive structures, so they can identify and react to potential problems. All-in-one GNSS monitoring receiver The Leica GM30 has been designed for continuous operation and for a variety of monitoring scenarios. This receiver comes with comprehensive onboard software, including site monitoring, Leica VADASE, data logging and FTP push. With its low power consumption, multiple simultaneous communication interfaces and a design built to withstand the harshest environmental conditions, this rugged receiver is ready for any challenge. High-end GNSS technology The Leica GM30 monitoring receiver meets today's and tomorrow's GNSS signal needs by providing 555 GNSS channels, and delivers top-quality results 24 hours a day, 7 days a week. Detect and react faster to potential problems thanks to support for all available and future GNSS signals, providing timely and accurate information on the condition of sensitive structures. With the innovative SmartTrack+ technology, interference is no longer a threat. Keep multi-frequency GNSS running continuously, even in difficult radio-frequency environments. Capture information on the frequency power spectrum as seen by the receiver, including all wanted and unwanted signals. Easily identify and mitigate intentional or unintentional sources of interference. Leica GM30 GNSS monitoring receiver flyer Leica GM30 GNSS monitoring receiver data sheet Leica GM30 GNSS monitoring rece

Related products

• GNSS receiver for machine control iCON aps 200 Series Leica
• High-precision GNSS receiver Viva GS10 and GS25 Leica
• Remote control for 3D Mplus, 4D laser Metrica — from the category Laser Accessories
• Tripod with elevator for SK700GD, SK106D/GD Makita P-81315 — from the category Laser Level Accessories
• Alkaline mini battery MN21 — from the category Household Batteries
• Browse the whole category: Laser Measuring Tools and Accessories

Before you order

In your request, please state the dimensions and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.