RaimondiDiamond discs for angle grinders RaimondiCode DISCHI-DIAMANTATI-PER-SMERIGLIATRICE-ANGOLARE
Cut tiles, porcelain stoneware and ceramic with clean edges and minimal chipping.
All Raimondi products
Cutting machine for large slabs 400 cm Linea LAB Raimondi
Key features
- Maximum cutting length400 cm (+15 cm entering the slab with mitre-cut effect)
- Maximum cutting thickness at 90°20 mm in a single pass; 45° mitre: 20 mm
- Max capacity (kg)300
- Minimum working area6×4.5 m (6×6 m with bench extensions)
- OptionalDigital cutting-width displays (Art. 374VISVESTD up to 161 cm, Art. 374VISVEMAXI up to 330 cm); pair of additional side benches Art. 374BRU2F2
- Slab thickness (mm)3 - 12
What it is
Cutting machine for large slabs 400 cm Linea LAB Raimondi. Key specifications: maximum cutting length 400 cm (+15 cm entering the slab with mitre-cut effect), maximum cutting thickness at 90° 30 mm; at 45° (mitre): 20 mm, maximum cutting thickness at 90° 20 mm in a single pass; 45° mitre: 20 mm.
A masonry saw bench is a bench-mounted machine with a diamond blade, usually water-cooled, for accurately cutting tiles, bricks, blocks and stone.
What it is for
Used for laying large-format slabs, where handling and flatness are the challenge, for cutting ceramics and porcelain stoneware and for straight and shaped cuts in tiles and porcelain stoneware.
How to use it
Set the machine on a level surface, fill the water tray if fitted and check that the blade is suited to the material and fitted in the direction of rotation. Place the workpiece on the sliding table against the fence, start the blade and feed it into the material without forcing. Connect it to a socket protected by an RCD, wear safety glasses and ear defenders, and clean the slurry out of the tray at the end of the day.
Where it is used
- Commercial construction
- Residential construction
- Renovation
Technical data
- Maximum cutting length: 400 cm (+15 cm entering the slab with mitre-cut effect)
- Maximum cutting thickness at 90°: 30 mm; at 45° (mitre): 20 mm
- Maximum cutting thickness at 90°: 20 mm in a single pass; 45° mitre: 20 mm
- Max capacity (kg): 300
- Minimum working area: 6×4.5 m (6×6 m with bench extensions)
- Slab thickness (mm): 3 - 12
Who it is for
Designed for marble and stone masons, tilers and floor layers.
Related products
- Tile cutter Zoe 85 Advanced Raimondi
- Tile cutter Zoe 150 Advanced Raimondi
- Diamond discs Raimondi — from the category Diamond Blades
- Diamond discs for angle grinders Raimondi — from the category Discs for Ceramics
- Earplug Earsoft Neri 186001 — from the category Ear Defenders and Earplugs
- Browse the whole category: Sawing Machines
Before you order
In your request, please state the length, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Maximum cutting length | 400 cm (+15 cm entering the slab with mitre-cut effect) |
|---|---|
| Maximum cutting thickness at 90° | 20 mm in a single pass; 45° mitre: 20 mm |
| Max capacity (kg) | 300 |
| Minimum working area | 6×4.5 m (6×6 m with bench extensions) |
| Optional | Digital cutting-width displays (Art. 374VISVESTD up to 161 cm, Art. 374VISVEMAXI up to 330 cm); pair of additional side benches Art. 374BRU2F2 |
| Slab thickness (mm) | 3 - 12 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
RaimondiFrame with suction cups for transporting large slabs Raim...
Lift and lay glass and stone slabs, large tiles and panels using vacuum suction.
RaimondiT-CUT scoring and cutting device for slabs RaimondiCode T-CUT-TCUT-DISPOSITIVO-PER-INCISIONE-E-TAGLIO-DI-L
Cut, drill, bevel and polish tiles and slabs during laying.