Power and recharge cordless tools of the same system to keep working without stopping.

Submersible pump for dirty water M18 HYDROPASS Milwaukee
Key features
- Battery typeLi-Ion
- Voltage (V)18
- Thread dimensions1 ¼″ female thread in
- Speed settings1
- IPX ratingIPX4
- Max head height (m)5,1
What it is
Submersible pump for dirty water M18 HYDROPASS Milwaukee. Key specifications: battery type Li-Ion, voltage (V) 18, thread dimensions 1 ¼″ female thread in.
A dirty water pump is an electric pump or engine-driven pump that draws water containing mud, sand or solids from excavations, sumps, tanks and flooded rooms.
What it is for
Used for water drainage and for pumping water out of excavations, tanks and sumps.
How to use it
Lower the submersible pump to the lowest point, suspended by a rope attached to the handle (never by the cable), and rest it on firm ground; set the engine-driven pump on a level surface, prime it by filling the pump casing with water and immerse the suction hose with its strainer. Connect the delivery hose without kinks, start the pump and check that it does not run dry. After use, run it in clean water to flush it out.
Where it is used
- Building services
- Building maintenance
- Water engineering works
Technical data
- Battery type: Li-Ion
- Voltage (V): 18
- Thread dimensions: 1 ¼″ female thread in
- Speed settings: 1
- IPX rating: IPX4
- Max head height (m): 5,1
- Max water temperature: 60 °C
- Capacity: 5670 l/h
- Automatic dry run shutdown: Sì
- Type of water it can pump: Dark water
- Weight (kg): 5,5
- Weight with battery: 6,6 (M18 FB8) kg
Who it is for
Designed for plumbers, building maintenance operatives and heating and plumbing engineers.
Standards and compliance
Reference standards: CE marking in accordance with the EU directives applicable to the water removal pumps sector, compliance with the technical and safety standards in force, technical documentation supplied by the manufacturer Milwaukee.
Submersible dirty water pump M18 HYDROPASS Milwaukee (Milwaukee®) — M18 HYDROPASS submersible pump for dirty water. The exclusive HYDROPASS filtering system prevents the filter from becoming blocked and allows the user to pump water at any time, regardless of debris. Pumps up to 5,670 litres per hour (94.5 litres/min) and up to 3,785 litres on one 12 Ah M18 FORGE battery.
Related products
- Electric pump BC Pedrollo
- Submersible pump for dirty water M12 HYDROPASS Milwaukee
- Trough water pipe — from the category Water Hoses and Layflat Hoses
- Portable generator, 2.5 KWh, PACKOUT 7200 / 3600 W, Milwaukee — from the category Portable and Wheeled Generating Sets
- Elastic straps for raffia tarpaulins with plastic hooks 28 cm, pack of 4 Neri 187057 — from the category Synthetic Ropes and Lines
- Browse the whole category: Electric and Engine-Driven Pumps for Dirty Water and Wastewater
Before you order
In your request, please state the supply voltage, the rated load or flow rate, the thread and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 13
| Battery type | Li-Ion |
|---|---|
| Voltage (V) | 18 |
| Thread dimensions | 1 ¼″ female thread in |
| Speed settings | 1 |
| IPX rating | IPX4 |
| Max head height (m) | 5,1 |
| Max water temperature | 60 °C |
| Capacity | 5670 l/h |
| Automatic dry-run shutdown | Sì |
| Underwater | No |
| Type of water it can pump | Dark water |
| Weight (kg) | 5,5 |
| Weight with battery | 6,6 (M18 FB8) kg |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Carry water for irrigating, washing and supplying machines in the garden and on site.
Clamp hoses, sleeves and cables to secure them to fittings and supports.



