FischerMasonry drill bit PMN FischerCode 4048962301861
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
All Fischer products
Masonry plug TherMax II Fischer
Also known as: anchor
Key features
- Threaded rod x lengthM12 x 204 mm
- Thread atM12
- Usable length E64 - 170 mm
- Tightening torque Tinst20 N·m
- PackBox
- Pieces per pack20
What it is
The TherMax II masonry anchor Fischer is a thermally broken spaced fixing, fitted with an M12 threaded rod 204 mm long and an M12 thread. It offers an adjustable useful length between 64 and 170 mm, with a recommended tightening torque Tinst of 20 N·m, and is supplied in a box of 20 pieces. The spaced fixing makes it possible to apply loads away from the wall without creating significant thermal bridges.
Plasterboard and insulation fixings are fixings that open out behind the board or hold insulation panels in place, for fixing to hollow walls and ETICS insulation systems.
What it is for
Used for anchoring shelves, brackets and structures to walls, for mechanical fixing of structures and components to walls, ceilings and floors and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill the board with a suitable bit or screw the self-drilling plug in directly, without hammer action. Insert the fixing and tighten it until it opens out behind the board, without overtightening so as not to break through the plasterboard. For insulation, drill through to the load-bearing substrate and insert the fixing flush with the panel, using the specified setting tool.
Where it is used
- Commercial construction
- Residential construction
- Renovation
Technical data
- Threaded rod x length: M12 x 204 mm
- Thread at: M12
- Usable length E: 64 - 170 mm
- Tightening torque Tinst: 20 N·m
- Pack: Box
- Pieces per pack: 20
Who it is for
Designed for insulation installers, metal fabricators, building maintenance operatives and HVAC technicians.
Related products
- Insulation fixing screw FID-Z Fischer
- Insulation plug FID II Plus
- Universal multi-material bit DeWalt DT6526-QZ — from the category Multi-Material Drill Bits
- Cordless right-angle drill M18 CRAD2 Milwaukee — from the category Drill Drivers
- Plaster rasps art. 609 — from the category Other Drywall Tools
- Browse the whole category: Plasterboard and Insulation Fixings
Before you order
In your request, please state the length and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 6
| Threaded rod x length | M12 x 204 mm |
|---|---|
| Thread at | M12 |
| Usable length E | 64 - 170 mm |
| Tightening torque Tinst | 20 N·m |
| Pack | Box |
| Pieces per pack | 20 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerNylon mesh sleeve FIS HK for chemical anchors Fischer
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
FerviSet of polished chrome combination spanners Fervi 0199PCode 0199P
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.
FischerSDS Plus Installation Adapter RA-SDS (Art. 62420), Fischer
Drill and chisel concrete and masonry with the quick-release fitting of light rotary hammers.