FerviBelt-driven pillar drill Fervi T072Code T072
Drill precise, perpendicular holes with the workpiece clamped beneath the bit.
Accessories collection:Hammer Drills, Drill Drivers and Rotary HammersIndustrial Lubrication and Technical Greases
All Fervi products
Extra-long-series cylindrical twist drill bit Fervi P023/02.50L1
Also known as: metal drill bit
Key features
- Diameter (mm)2,50
- Point angle135°
- Hardness770-830 HV
- MaterialSteel
What it is
The Fervi P023/02.50L1 extra-long-series straight-shank twist drill bit has a diameter of Ø 2.50 mm and is made of steel with a hardness between 770 and 830 HV. The increased length typical of the extra-long series allows deep holes to be drilled at small diameter, while the 135° point angle ensures accurate centring and a clean start on the material.
A metal drill bit is an HSS or cobalt twist drill, with a straight or taper shank, for drilling steel, non-ferrous metals and plastics.
What it is for
Used for drilling steel, stainless steel and aluminium, on a pillar drill or with a hand-held drill and in workshop machining of steel, aluminium and alloy parts.
How to use it
Clamp the workpiece in a vice, mark the centre and set the speed for the diameter and material: low for hard steels and large diameters, higher for aluminium and plastic. Lubricate with cutting oil on steel; on plastic, reduce the pressure as the bit breaks through to avoid chipping. Insert taper-shank drills into the pillar drill's spindle taper and remove them with a drift.
Where it is used
- Mechanical engineering industry
- Mechanical workshops
Technical data
- Diameter (mm): 2,50
- Point angle: 135°
- Hardness: 770-830 HV
- Material: Steel
Who it is for
Designed for metal fabricators, industrial maintenance technicians and mechanics.
Related products
- Extra-long-series cylindrical twist drill bit Fervi P023/02.50L2
- Extra-long-series cylindrical twist drill bit Fervi P023/02.00L3
- Rack-and-pinion chuck key, Fervi 0711/10 — from the category Pillar Drills
- Cross vice with swivel base Fervi 0188/100G — from the category Vices and Clamps
- Face mill, Fervi F406/50 — from the category Turning, Milling and Threading Tools
- Browse the whole category: Professional Drill Bits for Metal and Plastic
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 4
| Diameter (mm) | 2,50 |
|---|---|
| Point angle | 135° |
| Hardness | 770-830 HV |
| Material | Steel |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FerviTopping-up can Fervi 0183/750Code 0183/750
Lubricate chains, bearings and machine components and cool machining operations.
FerviSteel scribing point Fervi P005Code P005
Mark lines and centres on metal before drilling and drive out pins and dowels.
FerviCordless drill driver 20V Fervi FB20CD3AB-BCode FB20CD3AB-B
Drill and drive screws cordless, with an adjustable clutch to avoid stripping the screws.
For safety
PortwestSafety glasses Extra OTG Portwest PR03Code PR03
Protect eyes and face from fragments, dust, splashes and impacts.