Electropneumatic hammer DH40MC

What it is

Electropneumatic hammer DH40MC. Key specifications: weight (kg) 7,1, power (W) 1100, no load speed (rpm) 620.

A combination hammer is an SDS-Max hammer that drills with rotation and percussion and, with rotation switched off, chisels concrete and masonry.

What it is for

Used for light demolition, chasing and localised removal, for drilling reinforced concrete, in hammer or rotary hammer mode and for drilling solid and hollow masonry, clay brick and blocks.

How to use it

Make sure there are no cables or pipes at the work point. Insert the clean, greased SDS-Max bit or chisel and select the mode: hammer drilling or chiselling only. Hold the tool with both hands, using the side handle and depth stop, without pushing too hard. Wear safety glasses, hearing protection, a dust mask and gloves.

Where it is used

• Demolition
• Residential construction
• Renovation

Technical data

• Weight (kg): 7,1
• Power (W): 1100
• No load speed (rpm): 620

Who it is for

Designed for demolition operatives, electricians, plumbers and bricklayers.

Related products

• Electropneumatic hammer KH 5 E
• Electropneumatic hammer D25481K
• SDS-Max drill bit and chisel set — from the category SDS Max Drill Bits
• Hand-protection grips — from the category Demolition Chisels
• Kit, battery and charger, AEG — from the category Power Tool Batteries and Chargers
• Browse the whole category: Combination Hammers

Before you order

In your request, please state the power rating and the quantities required, so we can give you the right quotation first time.

For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.