CSC EdiliziaAnchor for Sheet Metal, CSC Edilizia
Fix to the roof the points where lifelines and fall protection devices are attached.
All CSC Edilizia products
Threaded rod kit, M12x300, CSC Edilizia 419F
Also known as: threaded bar kit, studding kit
Key features
- RegulationsUNI-ISO 2768
- ThreadM12x300 mm
- Weight (kg)1,20
- Steel grade8,8
What it is
The CSC Edilizia 419F M12x300 threaded rod kit is a set of fixing elements for lifeline systems, consisting of rods with an M12x300 mm thread in steel of strength class 8.8, one of the most widely used in structural applications thanks to its high load capacity. The kit, weighing 1.20 kg, is manufactured to the general tolerances of the UNI-ISO 2768 standard and supplies the threaded elements needed to anchor the components to the substrate.
Threaded rod is steel rod threaded along its entire length which, with nuts, washers and connectors, is used to make tie rods, hangers and chemical anchor fixings.
What it is for
Used as an anchor point in fall protection systems, for chemical anchoring, where the load or edge distance rules out a mechanical anchor and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Cut to length with a hacksaw or angle grinder and clean up the thread with a file or by running a nut over it. Screw it into couplers and connectors or set it in the hole with chemical anchor, then tighten with a nut and washer. Choose the property class and finish, zinc-plated or stainless, according to the load and environment.
Where it is used
- Industrial construction
- Residential construction
- Workplace safety and PPE
Technical data
- Regulations: UNI-ISO 2768
- Thread: M12x300 mm
- Weight (kg): 1,20
- Steel grade: 8,8
Who it is for
Designed for formwork carpenters, metal fabricators, building maintenance operatives and health and safety officers.
Related products
- Threaded rod kit, M12x500, CSC Edilizia 419E
- Threaded rod kit, M16x250, CSC Edilizia 419B
- Locking nut FTRC Fischer — from the category Hex Nuts
- Countersunk washer for wood screws FWC-CS ZP Fischer — from the category Flat Washers
- Resin Ac100-pro, vinyl ester, styrene-free, DeWalt DFC1230100 — from the category Chemical Anchors
- Browse the whole category: Threaded Rods
Before you order
Tell us the quantities you need and the intended use: if there is a more suitable version, or an equivalent available sooner, we will let you know.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Indicative price €13,40 – €20 + VAT
Incl. 22% VAT: €16,35 – €24,40
Indicative, excluding VAT, depends on quantity, ex works: the final price is the one in your quote
Source: Listino CSC Edilizia (cscedilizia.com) · updated 21/07/2026
Quantity
Specifications 4
| Regulations | UNI-ISO 2768 |
|---|---|
| Thread | M12x300 mm |
| Weight (kg) | 1,20 |
| Steel grade | 8,8 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
FischerDD dielectric insulation and centring device for threaded...
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
CSC EdiliziaCounter-plate for 606 CSC Edilizia 606ACode 606A
Build and complete horizontal and vertical fall arrest lifelines with certified components.
DeWaltSDS-plus bit 10x110mm DeWalt DT9665-QZCode DT9665-QZ
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.