A.M.E.S. srlConnecting nuts for threaded rods
Complete the fixing when screwed onto bolts, screws and threaded rods.
All DeWalt products
Threaded rods DeWalt DFC4130100
Key features
- Typethreaded rod with hex head for SC-PRO capsules
- Materialgalvanised steel, class 5.8
- ThreadM12
- Length (mm)160
- Bit diameter (mm)14
- Pack (pcs)10
What it is
Threaded rods DeWalt DFC4130100. Key specifications: type threaded rod with hex head for SC-PRO capsules, material galvanised steel, class 5.8, thread M12.
Threaded rod is steel rod threaded along its entire length which, with nuts, washers and connectors, is used to make tie rods, hangers and chemical anchor fixings.
What it is for
Used for chemical anchoring, where the load or edge distance rules out a mechanical anchor, for structural fixings, where the fixing is load-bearing and must be calculated and for supporting pipework and ductwork.
How to use it
Cut to length with a hacksaw or angle grinder and clean up the thread with a file or by running a nut over it. Screw it into couplers and connectors or set it in the hole with chemical anchor, then tighten with a nut and washer. Choose the property class and finish, zinc-plated or stainless, according to the load and environment.
Where it is used
- Industrial construction
- Industrial plant engineering
- Mechanical engineering industry
Technical data
- Type: threaded rod with hex head for SC-PRO capsules
- Material: galvanised steel, class 5.8
- Thread: M12
- Length (mm): 160
- Bit diameter (mm): 14
- Pack (pcs): 10
- Equipment supplied: hex-head installation sleeve
Who it is for
Designed for formwork carpenters, metal fabricators, plumbers and industrial maintenance technicians.
Related products
- Threaded rods DeWalt DFC4130150
- Threaded rods DeWalt DFC4130050
- Dome nuts, stainless steel A2 — from the category Hex Nuts
- Washers Stick-E - 36mm DeWalt DDF6750050 — from the category Flat Washers
- Adhesive capsule for SC-PRO chemical anchoring DeWalt — from the category Chemical Anchors
- Browse the whole category: Threaded Rods
Before you order
In your request, please state the length, the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Quantity
Specifications 8
| Item code | DFC4130100 |
|---|---|
| Type | threaded rod with hex head for SC-PRO capsules |
| Material | galvanised steel, class 5.8 |
| Thread | M12 |
| Length (mm) | 160 |
| Bit diameter (mm) | 14 |
| Pack (pcs) | 10 |
| Equipment supplied | hex-head installation sleeve |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
DeWaltVinylester Resin Anchor AC100-PRO, DeWalt
Bond threaded rods and sleeves into the hole for heavy-duty fixings in concrete and masonry.
DeWaltWashers Stick-E - 36mm DeWalt DDF6750050Code DDF6750050
Spread the load under nuts and screws and stop the fixing coming loose.
DeWalt18-piece combination spanner set DeWalt DWMT19237-1Code DWMT19237-1
Tighten and loosen nuts and bolts with the open end or the polygonal ring end.