Make tie rods, hangers and chemical anchor fixings together with nuts, washers and connectors.

Multi-cone bars FHB II-A L and capsules FHB II-P/PF, Fischer
Key features
- Storage36 months
- Hole diameter d0 (mm)18
- Suitable forFHB II-A L M 16 x 125
- Pieces per pack10
- Stainless steelA4
- ETA approval05/0164
What it is
Fischer FHB II-A L multi-cone rods and FHB II-P/PF capsules form a high-performance chemical anchoring system for structural fixing in concrete. The system is suitable for FHB II-A L M 16 x 125 rods and calls for a hole diameter d0 of 18 mm with an anchoring depth of 18 mm, in concrete class 20/25. The rods are available in A4 stainless steel and the system is covered by ETA 05/0164 approval, with a shelf life of 36 months. The pack contains 10 pieces.
Chemical anchor is a two-component resin in a cartridge that, injected into the drilled hole, bonds threaded rods and internally threaded sockets to the substrate; the category includes mesh sleeves and injection accessories.
What it is for
Used for anchoring shelves, brackets and structures to walls, for chemical anchoring, where the load or edge distance rules out a mechanical anchor and for structural fixings, where the fixing is load-bearing and must be calculated.
How to use it
Drill the substrate to the specified diameter and depth, clean the hole with a brush and blow-out pump, repeating several times, and insert a mesh sleeve in hollow brick. Discard the first resin until the colour is uniform, inject from the bottom of the hole and insert the rod with a twisting motion. Apply load only after the curing time stated for the substrate temperature.
Where it is used
- Industrial construction
- Residential construction
- Renovation
Technical data
- Storage: 36 months
- Hole diameter d0 (mm): 18
- Suitable for: FHB II-A L M 16 x 125
- Pieces per pack: 10
- Stainless steel: A4
- ETA approval: 05/0164
- Concrete class: 20/25
Who it is for
Designed for formwork carpenters, metal fabricators, plumbers and bricklayers.
Related products
- Multi-cone bars FHB II-A S and capsules FHB II-P/PF, Fischer
- Chemical Anchor RSB in Vial for Cracked Concrete and Seismic Loads, Fischer
- Threaded rods by the metre (classes 8.8 / 4.6-4.8 / stainless A2 / stainless A4) 7-6.10 Fischer — from the category Threaded Rods
- Manual gun for chemical anchors FIS AC Fischer — from the category Adhesive and Sealant Application Systems
- Concrete drill bit SDS Plus Quattric II Fischer — from the category Drill Bits for Granite, Masonry and Concrete
- Browse the whole category: Chemical Anchors
Before you order
In your request, please state the diameter and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 7
| Storage | 36 months |
|---|---|
| Hole diameter d0 (mm) | 18 |
| Suitable for | FHB II-A L M 16 x 125 |
| Pieces per pack | 10 |
| Stainless steel | A4 |
| ETA approval | 05/0164 |
| Concrete class | 20/25 |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Dispense and mix adhesives, sealants, foams and chemical anchors in the right dose and at the right point.
Drill concrete, brick and stone for wall plugs and anchors using a hammer drill.
Drill concrete, masonry and stone by combining rotation and hammer action.
For safety
Protect hands from abrasion, dirt, liquids and minor cuts while keeping a firm grip.





