Pump out and transfer dirty water containing light sludge, suspended solids and wastewater.

One-piece polypropylene inspection chamber Rototec
Key features
- Materialpolypropylene (PP)
- Colourgrey or green
- Dimensions (mm)PM20X20: 200 x 200 x 200; PM30X30: 300 x 300 x 300
- Equipment suppliedPP lid (cast iron on request), drilling rings
- ModelPM20X20G, PM20X20V, PM30X30G, PM30X30V
- Usewater drainage, inspection branch, extension for grease traps
What it is
The one-piece PP chamber is a technical chamber for installers and plant managers: used for water drainage, as an inspection junction and as an extension for grease traps with baffle plates; fitted with a PP lid (cast iron on request) and knockout provisions for pipe entries. Made of polypropylene, available in grey/green and in sizes 200×200 and 300×300 mm with knockout rings of Ø 11–9–7.5–5 cm and Ø 12.5–11–9–7.5 cm.
The inspection chamber is a prefabricated chamber, usually plastic and buried, inserted along the drain line to inspect, sample, separate or treat the water, each type having a specific function.
What it is for
Used for filtering system water and in the installation and maintenance of plumbing systems.
How to use it
Bury it on a levelled bedding, connecting the upstream and downstream pipes in the direction of flow and respecting the gradients. Bring the cover up to ground level and keep it accessible. Inspect and clean it at regular intervals, according to its function.
Where it is used
- Building services
- Water engineering works
Technical data
- Material: polypropylene (PP)
- Colour: grey or green
- Dimensions (mm): PM20X20: 200 x 200 x 200; PM30X30: 300 x 300 x 300
- Equipment supplied: PP lid (cast iron on request), drilling rings
- Model: PM20X20G, PM20X20V, PM30X30G, PM30X30V
- Use: water drainage, inspection branch, extension for grease traps
Who it is for
Designed for plumbers.
Related products
- Oil-absorbing inspection chamber Rototec
- Dosing inspection chamber Rototec
- Rectangular inspection chamber — from the category Inspection Chambers
- Submersible pump for heavily soiled water DXG inox Wortex — from the category Submersible Wastewater Pumps
- Single-phase motor protection circuit breaker, Friggeri SM-SBM 6.3-10 — from the category Distribution Boards and Protection Devices
- Browse the whole category: Water Purification
Before you order
In your request, please state the colour and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 6
| Material | polypropylene (PP) |
|---|---|
| Colour | grey or green |
| Dimensions (mm) | PM20X20: 200 x 200 x 200; PM30X30: 300 x 300 x 300 |
| Equipment supplied | PP lid (cast iron on request), drilling rings |
| Model | PM20X20G, PM20X20V, PM30X30G, PM30X30V |
| Use | water drainage, inspection branch, extension for grease traps |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Pump out muddy water with sand and debris from excavations, sumps and flooded rooms.
Eliminate or mask bad odours from portable toilets, waste, drains and rooms.
Distribute power on site and protect people and tools from overloads and earth leakage.
For safety
Protect hands from cuts, impacts, heat, cold and chemicals.





