Pump out and transfer dirty water containing light sludge, suspended solids and wastewater.

Anti-flood inspection chamber Rototec
Key features
- MaterialOne-piece LLDPE; trafficable high-density PVC grating; PE outlet
- Opening (mm)400 x 400
- Diameter (mm)660
- Outlet diameter (mm)50
- PumpPNRG01 with electric float switch and non-return valve
- Power (kW)0,3
What it is
The flood-prevention chamber is a one-piece LLDPE chamber with a 40×40 cm opening, fitted with a float-switch-controlled pump and a non-return valve: it collects water from the top grating and pumps it outside to protect garages, basements and rooms below sewer level. Detailed description: "PE chamber with a top opening with a heavy-duty high-density PVC grating, containing a pump controlled by a float switch and a PE discharge pipe with a non-return valve. The flood-prevention chamber is installed under the floor of garages, basements and other rooms located below the level of the public sewer in order to collect water and push it out of the room itself, thus avoiding sudden flooding caused, for example, by seepage, accidental bursts of water pipes or leaks from household appliances (e.g.
The inspection chamber is a prefabricated chamber, usually plastic and buried, inserted along the drain line to inspect, sample, separate or treat the water, each type having a specific function.
What it is for
Used for water drainage, in the installation and maintenance of plumbing systems and for pumping water out of excavations, tanks and sumps.
How to use it
Bury it on a levelled bedding, connecting the upstream and downstream pipes in the direction of flow and respecting the gradients. Bring the cover up to ground level and keep it accessible. Inspect and clean it at regular intervals, according to its function.
Where it is used
- Building services
- Water engineering works
Technical data
- Material: One-piece LLDPE; trafficable high-density PVC grating; PE outlet
- Opening (mm): 400 x 400
- Diameter (mm): 660
- Outlet diameter (mm): 50
- Pump: PNRG01 with electric float switch and non-return valve
- Power (kW): 0,3
- Flow rate (l/min): 20-155
- Head (m): 6-1
- Model: PDG150 (130 L, H 550 mm), PDG300 (175 L, H 700 mm)
- Use: garages, basements and premises below sewer level
Who it is for
Designed for plumbers.
Related products
- Non-return inspection chamber Rototec
- Diffuser plate Rototec
- Rectangular inspection chamber — from the category Inspection Chambers
- Submersible pump SP 22.000 Dirt Level Sensor Kärcher — from the category Submersible Wastewater Pumps
- 1P+N miniature circuit breaker, Friggeri FR-MG1N10/45 — from the category Distribution Boards and Protection Devices
- Browse the whole category: Water Purification
Before you order
In your request, please state the diameter, the power rating, the rated load or flow rate and the quantities required, so we can give you the right quotation first time.
For prices and availability, request a quote from AMES Srl: we will reply with our quotation, delivery times and, where needed, an equivalent technical alternative.
Specifications 10
| Material | One-piece LLDPE; trafficable high-density PVC grating; PE outlet |
|---|---|
| Opening (mm) | 400 x 400 |
| Diameter (mm) | 660 |
| Outlet diameter (mm) | 50 |
| Pump | PNRG01 with electric float switch and non-return valve |
| Power (kW) | 0,3 |
| Flow rate (l/min) | 20-155 |
| Head (m) | 6-1 |
| Model | PDG150 (130 L, H 550 mm), PDG300 (175 L, H 700 mm) |
| Use | garages, basements and premises below sewer level |
The perfect setup for this job
Everything you need in one place, from functionality to safety.
For the job
Pump out muddy water with sand and debris from excavations, sumps and flooded rooms.
Eliminate or mask bad odours from portable toilets, waste, drains and rooms.
Distribute power on site and protect people and tools from overloads and earth leakage.
For safety
Protect hands from cuts, impacts, heat, cold and chemicals.





